软管泵水渠机定制销售售后为一体

软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.

多用途移动泵站的主要用途：
多用途移动泵站基于泵设计开发，大流量软管泵是市政给排水中常用的一种泵型，拥有大量的潜在用户，其产品主要用于污水、初沉污泥、浓缩污泥等的抽排输送。由于转子泵具备自吸能力强、耐干转、流量范围大、耐磨损的特点受到国内设计单位和使用单位的青睐。

The main purpose of the multi-purpose mobile pumping station:
The multi-purpose mobile pumping station is based on the design and development of a pump. The large-flow hose pump is a type of pump commonly used in municipal water supply and drainage. It has a large number of potential users. Extraction delivery. Rotor pumps are favored by domestic design units and users due to their strong self-priming ability, resistance to dry running, large flow range and wear resistance.

软管泵的设计选型要求：
1、当工艺条件没有特定的要求时候，那么选泵的流量是可以大于实际的需求流量的。
2、工艺条件在连续生产的时候，那么它本身的实际需要流量要和额定的流量吻合，如果是有特殊的需求，那么可以选择变频调速的泵。
3、软管使用的温度要小于100℃，主要是在工作的过程中会产生热量，如果是周围散热条件比较好的时候，那么介质的温度可以达到一百。
4、主要成分是天然橡胶，因此在选用的时候，要考虑软管对介质的适应性。
5、进出口是在同一个方向的，并且进出口是可以相互之间调换的，可以根据具体的情况来定。